Elf Bar ElfX 2.0 Replacement Pods

The Elf Bar ElfX 2.0 Replacement Pods are the dedicated refillable pods for the ElfX 2 Vape Kit. Available in 0.6Ω for RDTL vaping and 0.8Ω for MTL vaping, each pod features a vertical dual mesh coil, top-fill design, advanced anti-leak construction, and 2ml e-liquid capacity. £7.99 at EcigsUK.

QUAQ Dual Mesh Coil Technology

ElfX 2.0 pods are built around Elf Bar's dual mesh coil system — two mesh coil strips working in tandem to distribute heat evenly across the full wick surface. This delivers more consistent flavour, reduced hotspots, and more efficient e-liquid vaporisation compared to standard single-mesh pods. The vertical coil orientation further optimises wicking speed, eliminating dry hits when the pod is adequately filled.

Top-Fill Design

The top-fill port allows you to refill directly from above without removing the pod from the device. The 5A leak-resistant construction and anti-condensation technology keep the device clean and dry between refills, preventing e-liquid seepage during use.

0.6Ω vs 0.8Ω — Which Pod Is Right for You?

• 0.8Ω (MTL) — Tight, cigarette-style draw. Lower wattage. Ideal for ex-smokers and 20mg nic salts.
• 0.6Ω (RDTL) — Slightly airier draw. Higher wattage. Denser vapour and fuller hit for experienced vapers.

Key Features

• Available in 0.6Ω (RDTL) and 0.8Ω (MTL)
• 2ml e-liquid capacity (UK TPD compliant)
• Vertical dual mesh coil | Top-fill design
• 5A leak-resistant | Anti-condensation technology
• Compatible with ElfX 2 and original ElfX Kit
• Optimised for 50/50 nic salt e-liquids | £7.99

Technical Specifications

Compatibility

Compatible with the ElfX 2 Vape Kit and the original ElfX Kit. Not compatible with the ElfX Mega — that device uses dedicated ElfX Mega QUAQ DURA pods.

Recommended E-Liquid

Optimised for 50/50 PG/VG nic salts. The Elfliq range — 38 flavours at £2.49 or 5 for £10 at EcigsUK — is the perfect pairing.

How to Replace Your Pod

Remove the old pod from the ElfX 2. Fill the new pod via the top-fill port with your chosen e-liquid. Insert until it clicks firmly. Allow 10–15 minutes to prime before the first puff. This prevents dry hits and extends coil life.

Why Buy from EcigsUK

EcigsUK stocks the full ElfX 2 ecosystem — the ElfX 2 Kit, these replacement pods, and the complete Elfliq nic salt range. Visit www.ecigs-uk.com.

Frequently Asked Questions

Are ElfX 2.0 Pods compatible with the original ElfX Kit?

Yes — ElfX 2.0 replacement pods are compatible with both the ElfX 2 Vape Kit and the original Elf Bar ElfX device. The pod connector is identical across both generations, so if you already own an original ElfX kit, these upgraded dual mesh pods will fit and work perfectly. They offer improved coil technology over the original pods, so you may notice better flavour consistency and slightly longer lifespan.

Are these pods compatible with the ElfX Mega?

No — the ElfX Mega uses its own dedicated QUAQ DURA replacement pods, which feature a different connector and coil design. ElfX 2.0 pods are specifically designed for the ElfX 2 and original ElfX devices only. Using incompatible pods with any device risks poor performance or leaking, so always ensure you're using the correct pod for your specific kit before purchasing.

Which resistance should I choose — 0.6Ω or 0.8Ω?

Choose 0.8Ω if you want a tight, cigarette-style MTL draw — ideal for ex-smokers and those using 20mg nic salts. The 0.8Ω pod runs at lower wattage for a cooler, smoother, more controlled inhale. Choose 0.6Ω if you prefer a slightly more open, airier RDTL draw with denser vapour and a warmer hit. The 0.6Ω runs at higher wattage and suits vapers who want more performance from their pod system.

How long does each ElfX 2.0 pod last?

Under regular everyday use with quality 50/50 nic salt e-liquids, each ElfX 2.0 pod typically lasts between one and two weeks before flavour quality begins to decline. Coil lifespan is affected by how frequently you vape, the e-liquid you use, and whether you prime the pod properly before first use. Always allow ten to fifteen minutes of saturation time after filling a new pod to maximise its lifespan and prevent dry hits.

Do I need to prime the pod before use?

Yes — priming is essential and should never be skipped. After filling a new pod with e-liquid, allow it to sit for a minimum of ten to fifteen minutes before taking your first puff. This gives the cotton wick inside the dual mesh coil enough time to fully absorb the e-liquid. Vaping on an under-primed pod causes a dry hit, which burns the cotton and permanently damages the coil, significantly shortening the pod's lifespan.

What is the best e-liquid for ElfX 2.0 pods?

50/50 PG/VG nic salt e-liquids are ideal for ElfX 2.0 pods. The Elfliq range by Elf Bar — 38 flavours at £2.49 per bottle or 5 for £10 at EcigsUK — is specifically formulated for this type of pod system and delivers exceptional flavour consistency. High-VG shortfills and sub-ohm e-liquids are too thick for MTL and RDTL pod coils and will reduce performance and coil life considerably.

For adult use only. You must be aged 18 or over to purchase. All products comply with the UK Tobacco Products Directive (TPD). Nicotine is an addictive substance. Not suitable for non-smokers, pregnant women, or people with cardiovascular conditions. Keep out of reach of children and pets.